Nitrile is actually a blended black rubber sheet and comes in white color. NITRILE RUBBER SHEETS are designed for seals, pads and general gasket applications where organic, animal or industrial oils are present. The Nitrile Sheets have very good resistance to all natural grease and synthetic products and are recommended for use in areas dealing with petroleum products.

SPECIFICATIONS

Standard Thickness (mm)         2mm to50mm
Standard Roll Size
  1. 1 Mtr x 2 Mtr,
  2. 1Mtrs x Long length,
  3. 1.2 Mtrs x Long length,
  4. As Per customer’s requirement.
Standard Finish Both Sides Smooth (SS)
Category:

FEATURES

  • Excellent resistance to petroleum oils, aromatic hydrocarbons, mineral oils and many acids.
  • Good abrasion resistance.
  • Good compression set.
  • Impermeable to many gases.
  • Available in various hardness
  • Moderate mechanical properties.

APPLICATIONS

  • Flange gaskets on pipes and tanks
  • Lining of pipes and tanks
  • Transfer and joining sleeves
  • Oil and fuel seals
  • Camlock washers
  • Insulating strip
  • Isolation barriers
  • Oil resistant skirting rubber

TECHNICAL SPECIFICATIONS

Common Name Chemical Name Nomen-Clature Hardness Range Low Temperature Resistance Heat Resistance Tensile Strength Elongation Strength
Nitrile Nitrile Butadine rubber NBR Shore A 40 -95 -20° C Max. Continuous -100° C
Max. intermittent-
130° C
Up to
150 kg /cm sq.
Up to 400 %

 

Specific Gravity Thickness Width Length Surface Insertion Packing Compression Set
1.32-1.50 gm/cm³ 0.5-6 mm
6-60mm
1.0/1.2m
1.0/1.2m
10 m
2.0/2.4m
Plain (smooth)/ fabric marked/patterned. Possible –Nylon/cotton/polyester Rolls/flats Max.40% for 22hrs at 70° C